Dalapro Roll Hydro Wet Room Roller Filler - 12L

Dalapro Roll Hydro is a blue, ready-mixed roll-on filler made for bathrooms, shower rooms, utility rooms and anywhere else that gets steamy or splashed. You roll it onto the wall or ceiling with a filler roller, smooth it off with a wide blade, and it dries to a hard, water-repellent surface that is ready for paint or tiles. It is the roller version of Dalapro Hydro, the specialist wet room filler.

Rolling is the easy way to skim a whole bathroom. The smooth consistency spreads evenly over the whole surface without effort, covering patchy plaster and plasterboard joints, and it is far quicker than hand filling and much kinder on shoulders and back.

Why choose Roll Hydro

• Made for wet rooms, dries hard and water repellent
• Rolls on like paint, no trowel skills needed
• Spot repairs and full walls from the same tub
• Also fills plasterboard joints and embeds paper tape
• Suits plasterboard and concrete walls and ceilings indoors

Coverage and pack

• 12 litre tub
• About 1 litre per square metre at 1mm, so roughly 12 square metres per tub
• Grain size max 0.2mm, blue

How to use

1. Make sure the wall is clean, dry and sound, and the room is above 5°C.
2. Roll the filler on in an even layer with a filler roller.
3. Smooth it off straight away with a wide smoothing blade.
4. Let it dry, sand lightly with 100 to 120 grit, dust off, then paint. Prime first if you are wallpapering.

For a shower enclosure or full wet room, tank the walls as your tiling system requires; the filler gives a hard, moisture-resistant base but is not a waterproof membrane. Pair it with the Dalapro Roll Kit for the roller, smoothing blade and joint knife.

Technical data

From the Dalapro product data sheet. Drying time depends on substrate, layer thickness, temperature and humidity.